 |
Shopping
|
 |
All Categories
|
 |
|
Special Deals!... Buy One and get any 2nd listed Item at 5% Off |
|
| |
Item |
Price |
Image |
Action |
|
|
| |
Remington 870 Tactical Rail System Keymod
This Remington 870 tactical rail system with Picatinny rail optic mount for sight and integrated shotgun heat shield and keymod handguard for shotgun accessories features a six-shot shell holder and is the perfect tactical aftermarket upgrade conversion kit for your 12 gauge Remington 870 tactical shotgun. This tactical rail system for the Remington 870 shotgun lets you mount any red-dot scope, laser, flashlight, and Remington tactical shotgun accessories fast and easily. Put your Remington 870 tactical rail shotgun accessories where you need them on the handguard. The rail system is compatible with most 12-gauge Remington 870 shotguns. The hand guard has seven rows of KeyMod mounting surfaces for KeyMod accessories. features a vented integral heat shield and is drilled and tapped for an aftermarket front bead sight. Note that the rail system is not for vent rib barrels. No gunsmithing is required; the design is bolt-on. The shell holder is removable. Top rail is 1913 Mil-Spec Picatinny rail accepts weaver / Picatinny scope rings and mounts. Length: 24.42 inches. Made from strong aircraft-grade aluminum anodized in black. Limited one-year warranty
Specs
Top Mil-Spec Picatinny Rail
Removable Six Shot Shell Holder
Keymod handguard
7 Rows of KeyMod Mounting Surface
Vented Integral Heat Shield
Accepts Aftermarket Front Bead Sight
Made From Aircraft Grade T6 Aluminum
Note : Minimum barrel length must be 18 inch.
Compatible With (Most) Remington 12 GA.1100 and Remington 870 Shotguns.
Note: Rail System (Does not work with vent rib barrels). |
$ 139.99/ Each |
|
|
|
|
|
|
| |
Shotgun Bore Cleaning Brush 10/12 Gauge 3 Pack
Shotgun bore cleaning brush 10 gauge 3 pack designed for use with 10-gauge shotgun with all 10 gauge Shotguns. You get three brushes they fit standard cleaning rods 5/16- 27 thread ideal for tough cleaning jobs. This bore cleaning brush gives you multi-directional scrubbing action. Bristles have awesome durabilty bristles are made from high-quality bronze to scour away lead fouling, copper fouling, and powder residue. Bronze bore brushes are ideal for the safe, effective removal of metal fouling and powder residue from your shotgun.
Works great with Remington Model SP-10, Browning's BPS 10 gauge, New England Mad Turkey Shotgun SB2MAD, NEF Pardner Single Shot 10 Gauge, Taylors Model 1887 Lever Action 930000 and more. |
$ 9.95/ Each |
|
|
|
|
|
|
| |
G.I. Style M9 Bayonet Knife HD Stainless
M-9 Bayonet G.I. Style This Is A Great knife For Combat, Hunting and Survival. This is a excellent M-9 Bayonet 7.75 inch Heavy Duty Stainless Steel blade with blood groove and saw back, 12.75 inch overall length. This M-9 Bayonet Comes With A Sharpening Stone Built Into Back Of Sheath Under Sheath Snap. Comes with Heavy Duty Green Military Sheath which has quick release belt clip, front pouch, sharpening stone, wire cutter t-lug. Compatible for mounting on M16A1, M16A2, M4 Carbine and pre-ban AR15 style rifles. This is a quality high bayonet for the money.
Specs
7.75 Stainless Steel Blade
HD Stainless Steel Blade
Heavy Duty Green Military Sheath
12.75 Overall
Wire Cutter T-Lug
Front Pocket For Extra Gear
Sharpening Stone Built In To Sheath
Saw Back
We Recommend You Get G.I. Sharpening Stone Item # (3242 G.I.) Or Sharpening Stone Item # 3232.
Note Fits M16, M4 AR-15 Rifle With Bayonet Lug.
Note Fits Mossberg 590 Tactical Shotguns With Bayonet Lug.
We have Mossberg 500 shotgun Bayonet Mount Lug Kits Available MSHBAYMOS
We Have Remington 870 Shotgun Bayonet Lug Mount Kits Available MSHBAYREM
|
$ 39.99/ Each |
|
|
|
|
|
|
| |
Short Barrel Shotgun Case Scabbard Black
This black short barrel shotgun scabbard case is perfect for Mossberg 590 Shockwave, Remington 870 Tac-14, Remington V3 TAC-13 and other SBS/AOW firearms with a short barrel and raptor bird head pistol grip. The padded tactical shotgun scabbard is designed for shoulder carry, and it is MOLLE compatible. The shotgun scabbard has MOLLE webbing is on both sides of the scabbard for adding accessories with four detachable PALS straps for attaching to other MOLLE gear. Two metal D-ring for attaching the included padded shoulder sling with metal spring clips. Removable retention strap with quick-release buckle to secure the firearm to the scabbard. Padding around the whole scabbard to protect your shotgun. Grommet on the bottom of the scabbard for drainage. 5 elastic loops along the spine of the scabbard for securing 12 gauge. Shotshells. Expandable to four positions for various receivers and barrel lengths. The scabbard is expandable from 20"to 25" in length. Dimensions: 20”L – 25”L X 6.75”W X 2.4”D. Can be used with most MALICE or MOLLE style clips. |
$ 29.99/ Each |
|
|
|
|
|
|
| |
Remington 870 ATI Tactical Shotgun Forend with Picatinny Rails FDE
ATI Flat Dark Earth Remington 870 Tactical Shotgun Forend with Picatinny Rails. This FDE Universal Tactical Shotgun Forend for Remington 870 shotguns has 2 Rail Locations at 90° Increments Around Forend. Comes With Tactical Shotgun Picatinny Rail Package. One Left 2" Picatinny Rail, One Right 2" Picatinny Rail. Rails Allow for Easy Installation of all Your Favorite Accessories. 2 Blank Inserts for When Rails are Not in Use. Textured Forend Very Tough, yet Extremely Lightweight. Made From DuPont Extreme Temperature Glass Reinforced Polymer. Manufactured in the USA ATI Limited Lifetime Warranty.
Note Mossberg / Maverick 88 forends require a 6 3/4" slide action tube in order to Fit check your shotgun before you order.
Note *The forend included in this package is compatible with most Mossberg Shotguns with a removable forend, any Mossberg Shotgun newer than 2006 should be checked to insure that it has a removable forend. Winchester Forend Tubes with a Minimum Length of 6 ¼ Inches are Required for use of this Product.
Does Not Fit: Remington 870 DM & Mossberg 590M.
Warning!!! - Do Not Over Tighten Screws Stripped Holes and Broken Screw Heads are NOT Covered Under the Warranty.
|
$ 29.99/ Each |
|
|
|
|
|
|
| |
Scorpion Six Position Stock Buttpad Recoil System
ATI’s Scorpion Recoil System features a brand new material that absorbs the
initial shockwave or the felt punch of the recoil. The Scorpion Recoil System
increases the shooter’s comfort while reducing the muzzle lift. Recoil Impact is
Absorbed - Shooting Anything from a 3.5" Magnum Turkey Load to a Door Breaching
Load, can now be Done with no Pain Being Transferred to the Shooter. Reduces the
Challenge to Reacquire the Target by Minimizing the Muzzle Lift. Not Affected by
Chemicals. Remains Flexible in Extreme Temperatures. Eliminates the Punch of the
Recoil. Removes Limitations from Spring and Piston Type Recoil Suppression
Systems. Absorbs the Energy Wave Regardless of the Load Size Which Makes it
Perfect for any Type of Rifle or Shotgun. Manufactured in the USA. ATI Limited
Lifetime Warranty.
Fits ATI’s Strikeforce, Tactical Shotgun Six Position and Six Position Pistol
Grip Stocks for, AK, AR, H&R, Maverick 88, Mossberg 500/535/590/835, NEF,
Remington 870/7600, Rossi, Ruger Mini 14/30 and Ruger 10/22, SKS and Winchester
1200/1300. |
$ 19.99/ Each |
|
|
|
|
|
|
| |
ATI TactLite Scorpion X2 Razorback Recoil Pad Upgrade Kit
ATI gunstocks Scorpion X2 TactLite Recoil Pad Upgrade Kit for ATI's Tactlite stocks has 1.5 inches of thickness for recoil absorption of heavy duty loads. The X2 razorback Recoil Reducing Butt-Pad allows recoil impact to be absorbed with no pain being transferred to the shooter and remains flexible in extreme temperatures.1 1/2" Thick Butt-Pad. ATI Limited Lifetime Warranty. Made in the USA.
Mounting plate included
ATI Manufactured in the USA
Limited lifetime warranty
Fits: ATI's Tactlite Stocks Only.
Also available in X1 Standard Thickness Razorback Recoil Pad Item # A.5.10.2531 |
$ 22.99/ Each |
|
|
|
|
|
|
| |
Shotgun Sling 15 Round Shot Shell Bandolier Two Point Sling
This black tactical shotgun combat sling holds 15 rounds of your favorite shotgun ammo. The shot shell bandolier two-point sling comes in SWAT black. The bandolier sling holds 15 2 ¾" or 3" shotgun shells and comes with 2 sling swivels. This Tactical Shotgun Sling with shell bandolier has a padded cover to secure shotgun shells in place. The padded sling cover attaches to the sling via hook and loop fasteners. The barrel end of the sling has an elastic band section to absorb the shock when walking with the shotgun shouldered. There is also a padded shoulder pad covering the shoulder area of the sling to make it more comfortable when shouldered. The Shoulder Pad has 1" of web material sewn on to provide attachment points for attaching a pocket knife, multi-tool, or flashlight. It includes a pair of 1" Sling Swivels to attach to the sling studs on your shotgun, or the sling can attach directly to the sling loops on your shotgun. Length: adjustable from 33.0" to 55.0".
Note: This sling fits most shotguns equipped with sling swivel studs or loops, such as the Mossberg 500, 535, 590, 590A1, 590M, 835, 930, 935, and FLEX models, Maverick 88, Remington 870, Versa Max, V3 Waterfowl Pro, Winchester Shotguns, and more. |
$ 36.99/ Each |
|
 |
|
|
|
|
| |
Shotgun Sling 15 Round Shot Shell Bandolier Two Point Sling OD Green
This military green tactical shotgun combat sling holds 15 rounds of your favorite shotgun ammo. The shot shell bandolier two-point sling comes in military green. The bandolier sling holds 15 2 ¾" or 3" shotgun shells and comes with 2 sling swivels. This Tactical Shotgun Sling with a shell bandolier has a padded cover to secure shotgun shells in place. The padded sling cover attaches to the sling via hook and loop fasteners. The barrel end of the sling has an elastic band section to absorb the shock when walking with the shotgun shouldered. There is also a padded shoulder pad covering the shoulder area of the sling to make it more comfortable when shouldered. The shoulder pad has 1" of web material sewn on to provide attachment points for attaching a pocket knife, multi-tool, or flashlight. It includes a pair of 1" Sling Swivels to attach to the sling studs on your shotgun, or the sling can attach directly to the sling loops on your shotgun. Length: adjustable from 33.0" to 55.0". |
$ 36.99/ Each |
|
|
|
|
|
|
| |
Tactical Red Laser Sight With Weaver Mount
The compact tactical red laser sight with Picatinny-Weaver mount is designed for rifles and pistols equipped with a weaver or picatinny rail system. This red laser sight is fully adjustable for windage and elevation and features a side-to-side toggle on/off end cap switch. This compact, lightweight, aircraft-grade aluminum red laser sight mounts in seconds to any pistol, handgun, or AR-15 tactical rifle with a picatinny or weaver rail. This red laser sight will fit all Glocks with rails, as well as the S&W 40, SD9, Springfield Armory, Taurus: PT 92 AR, PT 24/7, Walther P22, Beretta 92, Heckler and Koch P200 series, and most others.
Universal Rail-Mount Laser Specifications
Weight 2 Ounces With Batteries
Length Less Than 2-1/4 Inches
Power Output. <5Mw Continous
Module (Super Bright) 635Nm Module
Range Up To 1000 Yards At Night
Batteries. 3) Ag-13 Button Cell Type Included
Battery Life Over 1.6 Hours Continuous
Beam Size Approx. 3.5 Inches At 100 Yds.
Material: Aircraft-Grade Aluminum
Color: Black
Limited Lifetime Warranty
We suggest Extra Laser Batteries Item # AG13
Will fit On Hi-Point 995TS Carbine, Hi-Point 4095TS Carbine with Weaver / Picatinny Rails. |
$ 29.99/ Each |
|
|
|
|
|
|
| |
Remington 870 Pistol Grip Adjustable Stock
This aftermarket Remington 870 express tactical pistol grip stock is six position adjustable synthetic stock, and it is designed just for your Remington 870, 887 and Tac 14 12/20 gauge model shotguns. This Tactical shotgun stock has AR style pistol grip with texture for non slip hold on your shotgun. Stock is made from glass reinforced polymer. Stock has ambidextrous sling loop built in to stock. No gun smith is required. One year limited warranty.
Note: This pistol grip stock work with most Remington 870/887 tactical shotgun 12/20 gauge models and similar clones Norinco 98, Hawk 982 & 981 some modification may be required to fit clone applications.
Note Stock Will Fit Most 20 Gauge Shotgun Models Listed But It Will Be (Protruding Slightly At The Rear Due to 20 gauge Receiver Dimensions Are Smaller). |
$ 79.99/ Each |
|
|
|
|
|
|
| |
12/20 Gauge Shotgun Shell Bandolier Holds 56 Rounds
Shotgun shell bandolier sling holds 56 rounds of 12 or 20 gauge ammo. This shotgun shell bandoleer sling is heavy duty nylon double stitched with spacing between each shell holder to prevent twisting of bandoleer and heavy loops grip shells. Color black. This is a Bandoleer over the shoulder belt sling with loops for cartridges. |
$ 19.99/ Each |
|
|
|
|
|
|
| |
Remington 870 Stock Strikeforce Six Position Adjustable Side Folding TactLite Shotgun Stock
The ATI B.1.10.1135.c Remington 870 tactical synthetic stock kit is recoil reducing. ATI Strikeforce Six Position Adjustable Side Folding TactLite Remington 870, 887 Shotgun Stock With Scorpion Recoil System, Fits Most Maverick 88, Mossberg 500/535/590/835, Remington 870, and Winchester 1200/1300 12 GA Pump-Shotguns. Stock Folds to the Left Side of Receiver New and Improved Pivot Housing Assembly With Trak LOCK System Eliminates Horizontal & Vertical Movement of the Stock on the Buffer Tube. Provides Smooth Secure Stock Adjustments. Eliminates the Need for Secondary Locking Mechanisms With No Snag Points. Dual Sided QD Sling Attachment Point. Scorpion Recoil System With Scorpion X1 Recoil Reducing Pistol Grip Extended Scorpion Material to Reduce Recoil and Discomfort to the Shooter’s Hand and Thumb and Eliminates the Felt Punch of the Recoil. Scorpion X2 Recoil Butt Pad With Sure-Grip Texture Is Non-Slip, Removable. Increased Thickness for Recoil Absorption of Heavy Loads Not Affected by Chemicals. Removable/Adjustable Cheek rest. Elongated Design to Fit All Users. Includes Cheekrest with Mounting Hardware Included. Made From DuPont Extreme Temperature Glass Reinforced Polymer. Easy Installation Adapters for All Supporting Models Included. Manufactured in the USA. ATI Limited Lifetime Warranty.
Fits: Most 12/20 gauge Maverick 88, Mossberg 500/535/590/835, Remington 870, and Winchester 1200/1300 12 GA Pump-Shotguns.
Note Stock Will Fit Most 20 Gauge Shotgun Models Listed But It Will Be (Protruding Slightly At The Rear Due to 20 gauge Receiver Dimensions Are Smaller).
We Recommend Tactical Stock Side-Saddle Shot Shell Carrier SSC0100
We Recommend A Single Point QD Bungee Sling To Go With This Stock A.5.10.2542 or PVC-GB507B. |
$ 109.99/ Each |
|
|
|
|
|
|
| |
T3 Shotgun Stock and Forend
The 12 gauge T3 Shotgun Stock and Forend Tactical Package fit Mossberg 500/535/590/835, Maverick 88, Remington 870, and Winchester SXP shotguns. The T3 shotgun stock with cheek rest is a 6-Position Adjustable Mil-Spec AR-15 style stock for shotguns. The stock provides smooth, secure adjustments and dual-sided QD sling attachment points. The X Series Recoil Reducing Pistol Grip has a Built-In X Series Recoil Absorbing Back Strap with a Slim Ergonomic Design and Sure-Grip Texture for Increased Control. The stock includes an X2 recoil reducing butt-pad that has been upgraded to a 1 1/4" thick pad. The felt recoil impact is absorbed and reduces the muzzle lift and eliminates the felt punch of the recoil when shooting any load size with no pain transfer to the shooter. The shotgun stock has a slot for a tactical sling attachment. Adjustable/Removable Cheekrest with Elongated Design to Fit All Users. The cheek rest provides 1/2" of vertical adjustment. The grip and forend are made from DuPont Extreme Temperature Glass Reinforced Polymer. A Limited Lifetime Warranty "Made in the USA."
Easy Installation Universal Mount System Securely Fasten your Tactical Stock with no Specialized Tools Note: Fits 12 Gauge Only, Does Not Fit 20 or .410 Gauge Shotguns.
Mossberg forends require a 6 3/4" slide action tube, Maverick shotguns will also require the addition of a Mossberg 6 3/4" slide action tube. *The forend included in this package is compatible with: Mossberg Shotguns with a removable forend, any Mossberg Shotgun newer than 2006 should be checked to insure that it has a removable forend from the action bar assembly such as the Maverick 88. Compatible with removable Remington 870 Forends.
All Items In Package Fit: Most 12-Gauge Mossberg 500/535/590/835 Winchester SXP and Remington 870 12-Gauge Pump-Action Shotguns. Winchester SXP model year 2021 and newer will require a small modification to the adaptor.
Fit Note: Winchester 1200/1300 12ga shotgun models you will need to purchase an additional Winchester 1200/1300 adaptor item # A.5.10.2558, click here for the adaptor.
Does Not Fit Remington 870 DM & Mossberg 590M |
$ 144.95/ Each |
|
|
|
|
|
|
| |
T3 TactLite Shotgun Stock 6 Position Adjustable FDE
The T3 TactLite Shotgun Stock from ATI is 6-position adjustable T3 Tactical Shotgun Stock In flat dark earth fits most 12/20-Guage Mossberg 500,590,590A1,590M,535,835,88 models, Remington 870/887/7400, Winchester SXP, FN P-12, Most Savage Stevens 320, TriStar Raptor Pump-Action Shotguns. Synthetic Shotgun Stock has AR-Style recoil pistol grip with Dual-Sided QD sling Attachment Points. Stock provides smooth secure stock adjustments. Stock recoil system absorbs the felt energy regardless of the load size with ultra thick non-slip removable 1-1/4" recoil pad. AR-style recoil pistol grip is non-slip textured. Stock has removable adjustable cheek rest with elongated design to fit all users. Cheekrest provides ½” of Vertical adjustment. Stock is made from DuPont® extreme reinforced polymer. Stock Comes with universal mount system to securely fasten your tactical stock with no specialized tools. Included adapter mounts for All Supported Models in One Package and All Mounting Hardware Included. ATI Manufactured in the USA. Stock Color Flat Dark Earth. Comes with rear stock only. ATI Limited Lifetime Warranty.
Fits: Most 12/20-Guage Mossberg 500, 590, 590A1, 590M, 505, 510, 535, 835, and Maverick 88 models, Remington 870/887/7400, Winchester SXP models and Black Shadow, FNH USA P-12, Most Savage Stevens 320 prior to 2016, TriStar Raptor, Charles Daly 301 Pump-Action Field Shotgun 12 ga. Shotguns. Some minor modification may be required on the included adaptor for new SXP model. Note Not compatible with 590 Shockwave, 590M Shockwave, or FLEX models.
Note Stock Will Fit Most 20 Gauge Shotgun Models Listed But It Will Be (Protruding Slightly At The Rear Due to 20 gauge Receiver Dimensions Are Smaller).
Note: On Some (Newer Models) Savage Stevens 320 produced in 2016 or after they have the new thicker trigger guard, they made changes to there trigger guard and it is thicker in the back. Please Check Your Trigger Guard Before You Purchase! You will need to purchase New Stock Adapter if it is the new style Click Here for Stock Adapter Item # 320-2556.
We Recommend A Single Point QD Bungee Sling To Go With This Stock A.5.10.2542 or PVC-GB507B. |
$ 109.99/ Each |
|
|
|
|
|
|
| |
Tactical Shotgun Scabbard Black
Tactical Shotgun Scabbard / Gun Case designed for shoulder carry or modular mounting (Molle compatible.) great for backpack, rucksacks with modular mounting. This Tactical Shotgun Scabbard has Webbing on both side with four detachable PALS straps for ambidextrous usage allowing you the choice of mounting it on your right or left. Also has Four D-ring locations for attaching the padded shoulder sling for multiple carry options or preferences. Comes with Removable retention strap with quick-release buckle. Tactical Shotgun Scabbard has Padding around the whole scabbard to protect your shotgun and eye grommet for drainage. This Tactical Shotgun Scabbard Is Expandable to four positions to fit various barrel lengths. Also has Adjustable zippered opening for pistol grip shotgun configuration. One size fits most Tactical shotguns like Remington Benelli, Mossberg and Winchester. One Year Limited Warranty. Color is Black.
The Scabbard is expandable to four positions for various barrel lengths (18" – 22" barrel lengths). |
$ 29.99/ Each |
|
|
|
|
|
|
| |
Tactical Shotgun Scabbard Green
Tactical Shotgun Scabbard / Gun Case designed for shoulder carry or modular mounting (Molle compatible.) great for backpack, rucksacks with modular mounting. This Tactical Shotgun Scabbard has Webbing on both side with four detachable PALS straps for ambidextrous usage allowing you the choice of mounting it on your right or left. Also has Four D-ring locations for attaching the padded shoulder sling for multiple carry options or preferences. Comes with Removable retention strap with quick-release buckle. Tactical Shotgun Scabbard has Padding around the whole scabbard to protect your shotgun and eye grommet for drainage. This Tactical Shotgun Scabbard Is Expandable to four positions to fit various barrel lengths. Also has Adjustable zippered opening for pistol grip shotgun configuration. One size fits most Tactical shotguns like Remington, Benelli, Mossberg and Winchester. One Year Limited Warranty. Color Is Green.
The Scabbard is expandable to four positions for various barrel lengths (18" – 22" barrel lengths). |
$ 29.99/ Each |
|
|
|
|
|
|
| |
Tactical Shotgun Scabbard Urban Gray
Tactical Shotgun Scabbard / Gun Case designed for shoulder carry or modular mounting (Molle compatible.) great for backpack, rucksacks with modular mounting. This Tactical Shotgun Scabbard has Webbing on both side with four detachable PALS straps for ambidextrous usage allowing you the choice of mounting it on your right or left. Also has Four D-ring locations for attaching the padded shoulder sling for multiple carry options or preferences. Comes with Removable retention strap with quick-release buckle. Tactical Shotgun Scabbard has Padding around the whole scabbard to protect your shotgun and eye grommet for drainage. This Tactical Shotgun Scabbard Is Expandable to four positions to fit various barrel lengths. Also has Adjustable zippered opening for pistol grip shotgun configuration. One size fits most Tactical shotguns like Remington, Benelli, Mossberg and Winchester. One Year Limited Warranty. Color Is Urban Gray.
The Scabbard is expandable to four positions for various barrel lengths (18" – 22" barrel lengths). |
$ 29.99/ Each |
|
|
|
|
|
|
| |
Remington 870 Express Top Folding Stock 12 Gauge
The ATI Shotforce top-folding shotgun stock for Remington® 870™ express 12 gauge shotgun can be fired in opened or folded position. This synthetic Remington 870, top folding stock also fits Maverick 88, Mossberg 500/535/590/835, Remington 870 and Winchester 1200/1300 12 Gauge Pump-Shotguns. Quick release button allows stock to lock in folded and unfolded position. Adaptor mounts for all supported 12 gauge shotgun models included. Top-folding stock has non slip textured pistol grip with swivel Stud Included. Stock is pre-drilled to accept shotgun shell holder sold separately. Made in the USA from DuPont® Extreme Reinforced Polymer. Limited Lifetime Warranty.
Fits Most 12, 20 Gauge Mossberg 535/500/500A/590/835, Maverick 88, Remington 870 12 Ga only, Winchester 1200/1300 and Defender, Maverick 88 and Norinco 98 Series*. Simple installation - no gunsmithing required. Note Stock Will Fit Most 20 Gauge Shotgun Models Listed But It Will Be (Protruding Slightly At The Rear Due to 20 gauge Receiver Dimensions Are Smaller).
Can be Fired in Opened or Folded Position
Pre-Drilled to Accept Shotgun Shell Holder
Pistol Grip
Easy Installation
Ambidextrous
Steel Hardware
Sling Swivel Stud Included
DuPont® Extreme Temperature Glass Reinforced Polymer
Quick Release Button Allows Stock to Lock in Folded/Unfolded Position
Limited Lifetime Warranty
Shotshell Holder Not Included But Available Item # SHO0500
We Also Recommend A Shotgun Heatshield Item Number SBS4600ATI |
$ 74.95/ Each |
|
|
|
|
|
|
| |
Remington 870 Pistol Grip Forend Kit With Rear Pistol Grip Shotgun Heat Shield
This ATI Remington 870 Pistol Grip Forend Kit With Rear Pistol Grip and Tactical Shotgun heat shield is for Remington 870 Shotguns. This 12GA Forend Pistol Grip Package with shotgun heat shield give your shotgun a personality of Its own. Pistol Grip Forend and Rear Pistol Grip and Mounts Made from DuPont Extreme temperature Glass Reinforced Polymer. Every Pistol Grip Package includes Mounting Hardware and Adapter Kit which allows installation to your shotgun Made In USA.
Specs
Forend & Rear Pistol Grips and Mounts
Heat shield Made From Formed Steel with Black Oxide Finish
Sling loop On Rear Pistol Grip
DuPont Extreme temperature Glass Reinforced Polymer
Made In USA.
Fits
Mossberg* 500/535/590/835, 12 Gauge
Winchester 1200/1300
Remington 870, 12 Gauge
This Kit Fits Most 12 GA Mossberg* 500/535/590/835, Remington 870 and Winchester 1200/1300 Shotguns Does Not Fits Winchester SXP Model. Heat shield Does Not Fit Any Vented Rib Barrel Models You would have to change your barrel.
*The forend included in this package is compatible with: (1) Mossberg Shotguns with a removable forend, any Mossberg Shotgun newer than 2006 should be checked to insure that it has a removable forend. (2) Winchester Forend Tubes with a Minimum Length of 6 ¼ Inches are Required for use of this Product.
Note: Some Modification May Be Required On (Included Adapters) To Fit Some 20 Gauge Shotgun Models. Modification At Your Own Risk.
|
$ 69.99/ Each |
|
|
|
|
|
|
| |
Tactical Two Point Sling For Rifles and Shotguns
This universal rifle-shotgun sling is a tactical two-point sling that is incredibly versatile with a quick-adjustable length slider and non-slip grip sling webbing. This two-point sling provides easy, quick adjustment to either lengthen or shorten the sling with no slipping once set in place on your firearms. The 1.5-inch extremely strong sling webbing makes it easy to shoulder and allows you to carry your rifle or shotgun hand-free while slung over your back and shoulder.This sling also gives you shooting support from various positions. This universal tactical two-point rifle-shotgun sling fits traditional sling swivel loops found on a wide variety of hunting shotguns and tactical rifles and has an adjustable length of up to 52" to accommodate various body types wearing tactical or hunting gear. The color is black. |
$ 9.99/ Each |
|
|
|
|
|
|
| |
Remington 870 Express 12 Gauge Tactical Pistol Grip Recoil Reducing
This ATI Remington 870 express 12 gauge tactical pistol grip with recoil reducing back strap and sling mount has a slim ergonomic design. This tactical rear pistol grip upgrade for your Remington 870, 887, Tac 14, 7400 carbine rifle and tactical shotgun models features QD single point sling attachment point at the rear of the grip. The pistol grip is scratch proof and weather proof and made from DuPont® extreme reinforced polymer. Ati limited lifetime warranty and made in the USA.
Note: This rear pistol grip will also fit: Mossberg 500/535/590/835 12/20 gauge, Maverick 88 12/20 gauge, Remington 870/887/7400 12 gauge Only, Winchester SXP, FNH USA P-12, Most Savage Stevens 320 before 2016, TriStar Raptor, Pump-Action Shotguns. Adapter mounts included for all supported models in one package all mounting hardware included.
Note: On 20 gauge shotgun models listed the pistol grip will be (Protruding slightly at the rear due to 20 gauge receiver dimensions are smaller).
We Recommend A Single Point QD Bungee Sling To Go With This Grip PVC-GB507B. |
$ 47.99/ Each |
|
|
|
|
|
|
| |
UTG Universal Single-rail Shotgun Barrel Mount, 3 Slots
The Leapers UTG universal single rail shotgun barrel mount with 3 slots is compatible with barrels and magazine tube diameter between 75"-1.1" inches around. The universal barrel mount picatinny rail for shotguns is solid aluminum construction with matte black finish. The shotgun barrel mount picatinny rail is easy to install with its two piece design for clamping directly to your shotgun barrels, magazine tube extension and lets you mount laser sights, tactical flashlights or bipod. Fits most shotguns barrels and magazine tubes perfect for Remington 870 1100 11-87 SP-10 Mossberg 500 835 Maverick 88 Winchetser 1300/1200 and many more. Compatible with firearm barrel range diameter .75"-1.1" inches around. |
$ 9.95/ Each |
|
|
|
|
|
|
| |
Remington 870, 1100,1187 Side Saddle Shell Holder
This aftermarket Remington 870/1100/1187 side saddle shell holder for a tactical shotguns hold six 12 gauge rounds. This receiver shell holder puts additional fire power quickly within reach on your Remington shotgun. Base plate is made from hard anodized aluminum that attaches to the side of the receiver using the existing pin/screw holes. All mounting hardware included no permanent alterations or gunsmith required. Back polymer carrier has a quick detach design Perfect for home defense shotguns. Limited lifetime warranty. Note Fits most 870 models 1100 and 1187 shotguns. Does not work with 870 express turkey and magnum models due to longer forend slide action. |
$ 39.99/ Each |
|
|
|
|
|
|
| |
Remington 870 Shotgun Bayonet Lug Mount Kit With Tactical Rails & Sling Stud
Remington 870 shotgun bayonet lug mount kit for 12 Gauge Shotguns and clones. This Remington 870 bayonet lug mount adapter fits 1" Magazine Tubes. Bayonet Mount has Tactical Rails and Slig Swivel Stud. Fits most home defense model shotguns with the extended mags in 12 gauge 1". magazine tube. Shotgun Magazine Tube mount includes two removable Picatinny accessory rails, a sling swivel stud, and the bayonet lug for securing M7 & M9 Bayonets. Compatible with the US M7 & M9 Bayonets. Easy to install onto the shotgun and the bayonet locks in place. Includes 2 side Picatinny accessory rails for mounting a flashlight and laser to your shotgun. Black Hard Anodized Aluminum Construction. Mounting bolts and tools is included.
Click Link For M9 Bayonet |
$ 17.99/ Each |
|
|
|
|
|
|
| |
Remington 870, 1100, 11-87 Barrel Rail Mount & Micro Red Dot Sight
This Ncstar for Remington 870,1100,11-87 shotgun barrel mag tube rail mount with micro red dot reflex sight optic combo is the perfect front tactical sight. Micro red dot reflex sight dot size 2 MOA with 23.5X16.8mm objective lens and integrated weaver / piccatinny mount. Red dot sight micro base on the barrel mount allows you to mount the micro red dot sight as low as possible on the rail. Remove the Weaver/Picatinny base mount from the Micro Dot and you can mount the DDAB sight directly to the MD Base on the cantilevered rail mount. Red dot micro dot reflex optic has ON/OFF switch and LED (Light Emitting Diode) 100% Safe for the Eyes. Sight has Unlimited Eye Relief. Sight Powered by 3 Volt Lithium Batteries (CR2032) included. Includes sight, Battery, Lens Cover, Mounting/Adjustment Tools Two Side Weaver/Picatinny style rails for attaching Accessories like Flashlight & Lasers to your Shotgun. All Aluminum Construction. Mount Has Black Anodized finish.
Note: Fits Most 12 Ga. Remington 870,1100,11-87 Models With Space To Mount With Extended Mag Tube. Mounts Onto Plain Barrel and 1" Magazine Tube.
We Suggest Extra Batteries Item # CR2032. |
$ 52.99/ Each |
|
|
|
|
|
|
| |
12GA Shotgun Magazine Tube Tri Rail Mount 1"
12Ga Shotgun Magazine Tube Tactical Tri Rail Mount MT12G. This 12Ga Shotgun Magazine Tube Rail Mount is design to fit onto most 1" diameter Extended Shotgun Magazines tubes. When mounted onto your Shotgun Extended Magazine tube, this will allow you to attach multiple Weaver & Picatinny style accessories to your shotgun Like laser Sights And Tactical Flashlights.
This 12Ga Shotgun Magazine Tube Tactical Rail Mount is designed so that you can attach your Laser sight and Tactical Flashlight at any of the 5 angles that the Shotgun Magazine Tube Tactical Rail Mount provide. Not only can you mount your accessories at the typical 3, 6, and 9 O’clock positions; you can also mount the accessories in the 4/5 and 7/8 O’clock positions.
This 12Ga Shotgun Magazine Tube Tactical Rail Mount can also be used on any 1" round diameter accessories with (slide over clearance) like 1" Scope tubes, flashlights, and laser sights.
Mounts onto shotgun magazine tube with the two provided Allen head bolts. Installation may require user to disassemble shotgun barrel, magazine tube/end cap/ clamp.
Fits 1" Diameter Tubes
Material: Aluminum
Color: Black
Overall Height: 1.5"
Overall Length: 1.4"
Overall Width: 1.5"
Fits Most 12 Ga Tactical Shotguns With 1 Inch Diameter Extended Mag Tube.
|
$ 14.99/ Each |
|
|
|
|
|
|
| |
Short Barrel Shotgun Case Scabbard Green
This Military Green short barreled shotgun case scabbard is perfect for Remington 870 Tac-14, Mossberg 590 Shockwave shotgun, Remington V3 TAC-13 and other SBS/AOW firearms with a short barrel. The padded tactical shotgun scabbard is designed for shoulder carry or mounting onto MOLLE compatible gear. MOLLE webbing is on both side of the scabbard with four detachable PALS straps for attaching to other MOLLE gear. Two metal D-ring for attaching the included padded shoulder sling with metal spring clips. Removable retention strap with quick-release buckle to secure firearm to scabbard. Padding around the whole scabbard to protect your shotgun. Grommet on the bottom of scabbard for drainage. 5 elastic loops along the spine of the scabbard for securing 12 ga. Shotshells. Expandable to four positions for various receiver and barrel lengths. The scabbard is expandable from 20" to 25" in length. Dimensions: 20"L 25"L X 6.75"W X 2.4"D |
$ 29.99/ Each |
|
|
|
|
|
|
| |
UTG PRO Remington Model 870 Picatinny Rail Scope Mount
The Leapers MTU028SG UTG Pro Remington 870 picatinny weaver rail scope mount is made in the USA. This UTG Remington 870 scope mount perfectly fits all Remington® 870 and 1100 Shotguns with drilled and tapped receiver. Picatinny rail mount Is precision machined from aircraft grade aluminum with matte back hard coat anodized finish. Low Profile with See Thru Design for Use of Front Bead Sight 6.1" Extended Length with 14 Picatinny Rail Slots for Dot Sights, Rear Sights, and Flexible Positioning of Magnified Optics for Proper Eye Relief Adjustment. Includes Assembly Screws and Tools for Simple and Friendly Installation, No Gunsmith Required. UTG Pro Limited lifetime warranty.
Material: HD Aircraft Grade Aluminum
Pieces:1
Rail Type: Picatinny/Weaver
No. of Rails:1
Length: 6.1 inch
Width:0.83 inch
Height: 0.34 inch |
$ 19.99/ Each |
|
|
|
|
|
|
| |
Remington 870 Pistol Grip For 12/20 Ga Shotgun
This aim aftermarket tactical Remington 870 Pistol Grip fits most Remington 870 12 Gauge and 20 Gauge (Standard Weight) receiver shotguns. Shotgun Pistol Grip Is made from durable polymer construction with ergonomic design and side texturing front and back serrations. Grip back is open to accepts AR-15 buffer tube for AR15 style 6 position stock. The pistol grip comes with bolt, washer, grip ring and allen key.
• Drop-in Fit
• Non slip base shelf
• 1.3 inch wide
• Color Black
Note : Will Not Fit Light Weight 20 Gauge Receiver. |
$ 16.99/ Each |
|
|
|
|
|
|
| |
Remington 870 Tactical Stock and Forend 12 Gauge
This aftermarket Remington® 870™ 12 Gauge tactical shotgun stock and forend replacement upgrades your Remington shotguns with a six-position adjustable pistol grip synthetic stock with ATI X1 recoil reducing butt-pad. This Remington 870 stock has dual-sided QD tactical sling attachment point. Stock and forend are made from DuPont extreme temperature glass reinforced polymer. Forend is ergonomic design with sure-grip Texture. Length of Pull: 12 1/8" - 15". Easy Installation. Adapters for All Supported Models Included All Mounting Hardware Included. Both stock and forend are ATI Made in the USA. Limited lifetime warranty.
Note: Both Items In Package Fit: Most 12 GA Mossberg* 500/535/590/835, Remington 870 and Winchester 1200/1300 & SXP Shotguns.
Note: Shotgun Forend for *Mossberg require a 6 3/4" slide action tube Note *The forend included in this package is compatible with: (1) Mossberg Shotguns with a removable forend, any Mossberg Shotgun newer than 2006 should be checked to insure that it has a removable forend. (2) Winchester Forend Tubes with a Minimum Length of 6 ¼ Inches are Required for use of this Product.
Notes: For 12 Gauge shotguns Only. Does Not Fit 20 or .410 Gauge Shotguns.
Warning!!! - Do Not Over Tighten Screws Stripped Holes and Broken Screw Heads are NOT Covered Under the Warranty.
We Recommend A Single Point QD Bungee Sling To Go With This Stock PVC-GB507B.
Note: We Suggest Adding Deluxe Heat Shield SBS4600ATI
|
$ 89.99/ Each |
|
|
|
|
|
|
| |
Remington 870 4X32 Scope and Mount Combo Kit
The aftermarket Remington 870® express 12 gauge 4X32 scope and mount combo kit is perfect your deer shotgun or home defense pump-action tactical shotgun. The Remington 870 scope mount features a tactical Picatinny saddle mount with side saddle shell holder and it is compatible with most Remington 870 models and 870 DM 12 gauge shotguns up to a 3.5" Chamber. The low profile saddle mount for your Remington 870 shotgun has See-thru feature V-cut on top picatinny rail for use of iron sights and two locking bolts included for replacing the original trigger pins. The mount is made from aircraft grade aluminum with matte black finish. The 4X32 compact scope has a Mil-dot reticle for fast target acquisition and three inch eye relief for flexible mounting. The scope is Milled from one solid piece of aircraft grade aluminum to withstand constant heavy recoil. The scope is fog proof rain proof and nitrogen charged with weather resistant seals. The scope has multi-coated lens provides superior light transmission, resolution and scratch resistance an windage and elevation adjustments. Scope lens covers and Weaver/Picatinny 1913 scope ring mounts are also included. Limited Lifetime Warranty.
Scope Specs
Magnification: 4X
Tube Diameter: 1"
Objective: 32 Mm
Eye Relief: 3"
Exit Pupil: 8 Mm
Fov (Feet At 100 Yds.): 36.6
M.O.A.: 1/4
Finish: Matte Black
Lens Coating: Blue
Fogproof : Yes
Nitrogen Filled: Yes
Heavy Duty Recoil: Yes
Water Proof: Yes
Limited Lifetime Warranty
Note: Compatible with most Remington 870 12 Gauge Shotguns up to a 3.5 chamber barrel. |
$ 79.99/ Each |
|
|
|
|
|
|
| |
Remington 870 Red/Green Dot Sight & Picatinny Saddle Mount Combo
This upgrade kit for your Remington 870® express 12 gauge features a red/green dot sight 4.0 MOA and Picatinny saddle mount with side saddle shell holders perfect your deer shotgun or home defense pump-action tactical shotgun. This saddle cope mount is compatible with most Remington 870 12 Gauge Shotguns up to a 3" Chamber. The low profile saddle mount has See-thru feature V-cut on top picatinny rail for use of iron sights and two locking bolts included for replacing the original trigger pins. The utg claw mount/saddle mount is made from Aircraft aluminum with matte black finish. The UTG Red/Green CQB Dot Sight with integral quick detach mounting deck and flip-open lens caps has a great field of View and Unlimited Eye Relief with clear and sharp 4.0 MOA Red/Green Dot sight with No-Reflection High Tech Emerald Coatings fro crisp clear view of target. The Red or Green Dot Adapts to Any Environmental Background with adjustable illumination rheostat with variable brightness levels offers stealthy and infinitely fine adjustment. You can aim and instantly lock on your target to enhance shooting accuracy and performance. UTG Limited Lifetime Warranty.
Specs:
Magnification: 1X
Tube Diameter: 38 mm
Objective Diameter: 30mm
Field of View @ 100 yards: 95'
Eye Relief: Infinity
Exit Pupil: 25mm
Click Value @100 yards: 1/2"
Length: 95mm
Parallax Setting: Infinity
Integral Quick Detach Mounting Deck
Fits Picatinny/Weaver Rails
Comes with Lens Caps
Batteries: CR2032 3V
1 Low Profile Saddle Mount With Shell Holder
UTG Limited Lifetime Warranty
Note: Compatible with Remington 870 12 Gauge Shotguns up to a 3" Chamber. |
$ 87.94/ Each |
|
|
|
|
|
|
| |
Remington 870 Tactical Stock 6 Position Adjustable buttstock
This aftermarket Remington 870 pistol grip stock kit is six-position adjustable buttstock and fits most 12/20 gauge model shotguns. The AR-15 M4 style 6 position adjustable tactical stock for your Remington 870, 887 shotgun comes with popular upgrades like a slip-on recoil butt pad and a QD sling swivel attachment points on the stock and loop. This ergonomic pistol grip stock kit for your Remington shotgun is designed to fit most users comfortably, with a collapsed length of 11 inches and a fully extended length of 14.25 inches. The stock kit is made from glass-reinforced polymer. This pistol grip stock kit also fits most Remington 870, 887 12/20 gauge pump action shotguns.
Note stock will fit most Remington 870, 887 20 gauge shotgun models listed but It will be protruding slightly at the rear due to 20 gauge receiver dimensions are smaller. Note: Some Minor Modification may be Required On some Maverick 88 models.
We Recommend A Single Point QD Bungee Sling To Go With This Stock A.5.10.2542 or PVC-GB507B. |
$ 89.99/ Each |
|
|
|
|
|
|
| |
Remington 870 Tactical Side Folding Stock Kit & Forend Black
This aftermarket Remington® 870 tactical collapsible side folding shotgun stock kit and forend with picatinny rails and shell holder carrier in black fits most Remington 870 express tactical 12 gauge shotguns. This tactical conversion kit for Remington 870 shotguns comes with one six position adjustable side folding pistol grip shotgun stock with recoil reducing system, cheek rest, tactical shotgun forearm-forend with picatinny rail package and a strikeforce stock shotgun shell carrier. The tactical shotgun stock is six-position adjustable and can be side-folding to the Left of the receiver and fired from folded position. The Trac lock system eliminates horizontal and vertical movement of the stock on the buffer tube and provides smooth secure stock adjustments. The stock has built in dual sided QD sling attachment points and removable adjustable cheek rest system designed to fit all users. Stock forend and buffer tube are made from DuPont extreme temperature glass reinforced polymer scratch proof and weatherproof. The X1 recoil reducing pistol grip has sure-grip texture so recoil impact is absorbed and reduces the challenge to reacquire the target by minimizing the muzzle lift. The stocks X2 recoil reducing butt-pad 1 1/4" thick pad so recoil impact is absorbed and eliminates the felt punch of recoil you can shoot any load size with no pain transfer to the shooter and it is not affected by chemicals or extreme temperatures. Stock shell carrier holds five 12 gauge shotgun shells and mounts to the cheek rest while still allowing the adjustment of the cheek rest. Can be added to either side of the stock. This stock kit is fast and easy to install and includes all adapters for all supporting shotgun models with included mounting hardware. ATI limited lifetime warranty made in the USA.
Easy Installation Universal Mount System Securely Fasten your Tactical Stock with no Specialized Tools Mounts Included for All Supported Models in One Package All Mounting Hardware Included.
Note: 12 Gauge Only, Does Not Fit 20 or .410 Gauge Shotguns. Mossberg forends require a 6 3/4" slide action tube, Maverick shotguns will also require the addition of a Mossberg 6 3/4" slide action tube. *The forend included in this package is compatible with: Mossberg Shotguns with a removable forend, any Mossberg Shotgun newer than 2006 should be checked to insure that it has a removable forend. Compatible with removable Remington 870 Forends. (Forend Does Not Fit: Remington 870 DM & Mossberg 590M)
All 3 Items In Package Fit: Most 12-Gauge Mossberg 500/535/590/835/ Maverick 88 and Remington 870 12-Gauge Pump-Action Tube Fed Shotguns Models.
Note: We suggest adding heat shield Item # SHS1300 and a single point sling MB32542 |
$ 159.99/ Each |
|
|
|
|
|
|
| |
Remington 870 Tactical Shotgun Stock Destroyer Gray
Destroyer Gray ATI Remington 870 tactical shotgun stock the perfect accessory for Remington 870,887, 12 gauge shotguns and Express models. The synthetic ATI Strikeforce Six Position Adjustable Side Folding TactLite Shotgun Stock With Scorpion Recoil System. Fits Most Maverick 88, Mossberg 500/535/590/835, Remington 870 and Winchester 1200/1300 12 GA Shotguns. Stock Folds to the Left Side of Receiver New and Improved Pivot Housing Assembly With Trak LOCK System Eliminates Horizontal & Vertical Movement of the Stock on the Buffer Tube. Provides Smooth Secure Stock Adjustments. Eliminates the Need for Secondary Locking Mechanisms With No Snag Points. Dual Sided QD Sling Attachment Point. Scorpion Recoil System With Scorpion T2 Recoil Pistol Grip Extended Scorpion Material to Reduce Recoil and Discomfort to the Shooters Hand and Thumb and Eliminates the Felt Punch of the Recoil. .Scorpion X2 Recoil Pad With Sure-Grip Texture Is Non-Slip, Removable. Increased Thickness for Recoil Absorption of Heavy Loads Not Affected by Chemicals. Securely Fasten your ATI Tactical Stock or Rear Pistol Grip with no Specialized Tools and it is Angled, Self-Aligning Dovetail Locking System for Easy Secure Installation. Additional Spacer for when Sling Mount is Not in use. Removable/Adjustable Cheek rest System. Elongated Design to Fit All Users. Includes Tall Cheekrest with 1 ¼" of Adjustment. Includes Short Cheekrest with ½" of Adjustment. Six Degree Drop Tube Adapter for Recoil Comfort. Mounting Hardware Included. Made From DuPont Extreme Temperature Glass Reinforced Polymer. Manufactured in the USA. ATI Limited Lifetime Warranty.
Fits: Most 12/20 gauge Maverick 88, Mossberg 500/535/590/835, Remington 870 887 12 Gauge, and Winchester 1200/1300 12 GA Pump-Shotguns.
Note Stock Will Fit Most 20 Gauge Shotgun Models Listed But It Will Be (Protruding Slightly At The Rear Due to 20 gauge Receiver Dimensions Are Smaller). |
$ 109.99/ Each |
|
|
|
|
|
|
| |
Remington 870 Rear Pistol Grip 12 Gauge Black
This Remington 870 12 gauge shotgun rear pistol grip is a non slip textured for a sure grip under fire. This ati shotgun pistol grip has recoil reduction back strap material and a QD sling attachment point at the rear of the grip. The grip comes with universal mount system and fits most Mossberg 500/535/590/835 12/20 gauge, Maverick 88 12/20 gauge, Remington 870/887/7400 12/20 gauge, Winchester SXP, FNH USA P-12, Most Savage Stevens 320 before 2016, TriStar Raptor, Pump-Action Shotguns. Pistol grip securely fasten to your tactical shotgun with no specialized tools. Made from Dupont extreme reinforced polymer. Manufactured in the USA. ATI limited lifetime warranty.
Fits: Most 12/20-Guage Mossberg 500, 590, 590A1, 590M, 505, 510, 535, 835, and Maverick 88 models, Remington 870/887/7400, Winchester SXP, FNH USA P-12, Most Savage Stevens 320 prior to 2016, TriStar Raptor, Charles Daly 301 Pump-Action Field Shotgun 12 ga Pump-Action Shotguns. Note Grip Will Fit Most 20 Gauge Shotgun Models Listed But It Will Be (Protruding Slightly At The Rear Due to 20 gauge Receiver Dimensions Are Smaller).
Note: On Some (Newer Models) Savage Stevens 320 They have made changes to there trigger guard and it is thicker in the back you may need are new adaptor item # 320-2556 click here.
Fit Note: Winchester 1200/1300 12ga shotgun models you will need to purchase an additional Winchester 1200/1300 adaptor item # A.5.10.2558, click here for the adaptor.
We Recommend A Single Point QD Bungee Sling To Go With The Rear Pistol Grips QD Sling Mount A.5.10.2542. |
$ 47.99/ Each |
|
|
|
|
|
|
| |
Remington 870 Express Shotgun Tactical Flashlight & Mount
This aftermarket Remington 870 Express tactical flashlight kit with accessories features an upgraded tri-rail shotgun barrel mount made from aircraft grade 6061 aluminum with a matte black finish and an offset flashlight mount. The tri-rail shotgun barrel mount has a 3-piece design for clamping onto a Remington 870 shotgun barrel or mag tube with space. This barrel mount for your Remington 870 shogun barrel has Picatinny/Weaver Style Rails on the sides and bottom that allow you to mount laser sights, QD sling swivels, and other accessories. This tactical shotgun flashlight kit barrel mount for your Remington 870 shotgun is compatible with Remington shotgun barrels and mag tubes (Range Diameter:.75"-1.1" inches).
The LED weapon light-tactical flashlight is a super bright 800+ lumens. The Flashlight Comes With A Weaver/Picatinny Mounting Ring, Push-Button and Remote Pressure Switch System and a Rechargeable Battery and Charger. This kit will fits Remington 870 Express, SAIGA 12, Winchester 1200/1300, Mavrick 88 Shotguns, Escort Shotguns MP-A, MPS WS Guard, Mossberg 500 Shotgun, Mossberg 590A1 Shotgun, Mossberg 930 SPX . Remington Model 870 TAC Desert Recon, Remington Model 1100 TAC 4, Remington Model 887 Nitro Mag Tactical, Remington Model 870 Express Tactical, Remington 870 Magnum Shotgun, Winchester 1200 Defender, Winchester 1300 Defender, Ithaca Shotgun Model 37 Defense and more.
Features
Weapons Mountable (Will Mount To Any 1" Tube Or Barrel )
Also Mounts to Weaver and Picatinny Type Rails
Tactical Momentary “On" Remote Pressure Pad
Push Button On/Off Battery Cap
New Integrated Weaver Mount On Weapons Mount
Can Handle Recoil Of 12 Gauge Shotgun
IP65 Rating Water-Resistant
Ultra-Bright LED
800+ Lumens
Working Time Hours Up To 4
Included Accessories
On/Off Push Button Tail Cap
Tactical Pressure Pad Tail Cap
Shotgun Tri-rail Mount Mag Tube/ Barrel Mount 1"
(1) 18650 Battery Rechargeable
(1) (Battery Charger
We Suggest 1 Extra Battery For This Item # 18650B |
$ 79.99/ Each |
|
|
|
|
|
|
| |
Remington 870 Tactical Side Folding Stock Kit & Forend FDE
This aftermarket Remington® 870 tactical collapsible side folding shotgun stock kit and forend with picatinny rails and shell holder carrier in FDE fits most Remington 870 express tactical 12 gauge shotguns. This tactical conversion kit for Remington 870 shotguns comes with one six position adjustable side folding pistol grip shotgun stock with recoil reducing system in flat dark earth, cheek rest, tactical shotgun forearm-forend with picatinny rail package and a strikeforce stock shotgun shell carrier. The tactical shotgun stock is six-position adjustable and can be side-folding to the Left of the receiver and fired from folded position. The Trac lock system eliminates horizontal and vertical movement of the stock on the buffer tube and provides smooth secure stock adjustments. The stock has built in dual sided QD sling attachment points and removable adjustable cheek rest system designed to fit all users. Stock forend and buffer tube are made from DuPont extreme temperature glass reinforced polymer scratch proof and weatherproof. The X1 recoil reducing pistol grip has sure-grip texture so recoil impact is absorbed and reduces the challenge to reacquire the target by minimizing the muzzle lift. The stocks X2 recoil reducing butt-pad 1 1/4" thick pad so recoil impact is absorbed and eliminates the felt punch of recoil you can shoot any load size with no pain transfer to the shooter and it is not affected by chemicals or extreme temperatures. Stock shell carrier holds five 12 gauge shotgun shells and mounts to the cheek rest while still allowing the adjustment of the cheek rest. Can be added to either side of the stock. This stock kit is fast and easy to install and includes all adapters for all supporting shotgun models with included mounting hardware. ATI limited lifetime warranty made in the USA.
Easy Installation Universal Mount System Securely Fasten your Tactical Stock with no Specialized Tools Mounts Included for All Supported Models in One Package All Mounting Hardware Included.
Note: 12 Gauge Only, Does Not Fit 20 or .410 Gauge Shotguns. Mossberg forends require a 6 3/4" slide action tube, Maverick shotguns will also require the addition of a Mossberg 6 3/4" slide action tube. *The forend included in this package is compatible with: Mossberg Shotguns with a removable forend, any Mossberg Shotgun newer than 2006 should be checked to insure that it has a removable forend. Compatible with removable Remington 870 Forends. (Forend Does Not Fit: Remington 870 DM & Mossberg 590M)
All 3 Items In Package Fit: Most 12-Gauge Mossberg 500/535/590/835/ Maverick 88 and Remington 870 12-Gauge Pump-Action Tube Fed Shotguns Models.
Note: We suggest adding heat shield Item # SHS1300 and a single point sling MB32542 |
$ 159.99/ Each |
|
|
|
|
|
|
| |
Remington 870 Marine Magnum Tactical Stock
This aftermarket Remington 870 Marine Magnum Tactical Stock comes with an ergonomic pistol grip and six position adjustable synthetic stock with accessories a 12 gauge three shot side saddle shell holder. This tactical stock upgrades your Remington 870/887 Marine shotgun with a M4 Mil-Spec telescoping stock with two tactical sling attachment points and stock design to fit most users comfortably. The stocks collapsed length: 10.75 inches and fully extended length: 13.75". Stock is Mil-Spec diameter and made from super strong glass reinforced polymer for tactical use.
Note: This stock work with most Remington 870/887 12 gauge shotgun models.
Note: similar clones like Norinco Hawk 98, 982 & 981
some modification may be required to fit applications.
We Suggest You Get a Recoil Pad to go with your stock. |
$ 89.99/ Each |
|
|
|
|
|
|
| |
Remington® 870 M-LOK® Shotgun Forend & Rear Pistol Grip Kit
The aftermarket Remington® 870 M-LOK® forend and rear pistol grip tactical upgrade kit is a drop-in replacement for the Remington 870 12 gauge shotgun. The replacement M-LOK forend for your Remington 870 shotgun has slots on all three sides of the forend for mounting m-lok Picatinny rails so you can add a laser, flashlight, grip hand stop and accessories. The m-lok forend is a narrower profile for comfort and better grip retection. The upgraded Remington 870 pistol grip in this kit features QD single point sling mount on the grip and slot for easy sling attachment on your Remington 870 shotgun. The comfortable ergonomic pistol grip features finger grooves with non-slip texturing and storage compartment for small parts or batteries for your laser or flashlight if you add one. The grip is made from high quality impact resistant reinforced polymer and all steel mounting hardware is included. The shotgun forend is sleek slim and made from high quality heat-resistant fiberglass reinforced polymer. This upgrade grip and forend kit for the Remington 870 platform ideal for police law enforcement and home defense shotguns.
Fit Notes: The forend included in this package is compatible with most standard Remington® 870 12 gauge shotguns only! with a ( Removable Forend From The 7-3/4" Action Slide Tube Assembly ) Note Some Minor Modification may be required to use this kit. Forend also may not work with some heat shields. Will not work with short barrel shotguns or Remington 870 Super Mag.
We Recommend a Single Point QD Bungee Sling To Go With The Rear Pistol Grips QD Sling Mount A.5.10.2542. and a forend removal tool MT001. |
$ 69.99/ Each |
|
|
|
|
|
|
| |
Remington 870 Express Tactical Sling
This aftermarket Remington 870 express tactical sling is adjustable and fits most shotguns with (two sling stud mounts). This is one of the best sling for Remington 870 tactical home defense shotgun, two-point slings works perfectly with tactical and hunting shotguns. Sling fits on Remington 870 models, and other Remington shotguns with (two sling stud mounts). This shotgun sling is ambidextrous design and comes with integrated QD sling swivels for easy mounting on just about any shotgun sling swivel stud found on stock and magazine cap with swivel stud. Sling is constructed of heavy-duty black nylon webbing. Sling has elastic band section to absorb the shock when walking with the shotgun shouldered. Comes with shoulder padded shell cover that attaches to sling via hook and loop fasteners and holds 15 shotgun shells. Molle 1" web material sewn on to removable pad section to provide attachment point for accessories like pocket knife, multi-tool, or flashlight. Sling has limited one year warranty.
Note: Sling can be used with most shotguns with two sling stud mounts found on brands like Mossberg, Remington 870, Winchester SXP, Benelli and most others.
Some Synthetic Stocks with molded sling holes may need to be modified by widening hole towards stock to accept QD Swivel. |
$ 36.99/ Each |
|
|
|
|
|
|
| |
Shotgun Rear Pistol Grip 12/20 ga Destroyer Gray
Destroyer Gray 12/20 gauge shotgun rear pistol grip universal. Rear Pistol Grip Fits most Mossberg 500/535/590/835, Maverick 88, Remington 870/887, Winchester SXP, FNH USA P-12, Savage Stevens 320, TriStar Raptor/ Pump-Action 12 GA Shotguns. This ati shotgun pistol grip has recoil reduction material QD sling attachment point at the rear of the grip. Comes with universal mount system Pistol grip securely fasten to your tactical shotgun with no specialized tools. Adapters mounts included for all supported models in one package and all mounting hardware included. Made from Dupont extreme reinforced polymer. Manufactured in the USA. ATI limited lifetime warranty.
Fits: Most 12/20-Guage Mossberg 500, 590, 590A1, 590M, 505, 510, 535, 835, and Maverick 88 models, Remington 870/887/7400, Winchester SXP, FNH USA P-12, Most Savage Stevens 320 prior to 2016, TriStar Raptor, Charles Daly 301 Pump-Action Field Shotgun 12 ga Pump-Action Shotguns. Note Grip Will Fit Most 20 Gauge Shotgun Models Listed But It Will Be (Protruding Slightly At The Rear Due to 20 gauge Receiver Dimensions Are Smaller).
Note: On Some (Newer Models) Savage Stevens 320 They have made changes to there trigger guard and it is thicker in the back you may need are new adaptor item # 320-2556 click here.
Fit Note: Winchester 1200/1300 12ga shotgun models you will need to purchase an additional Winchester 1200/1300 adaptor item # A.5.10.2558, click here for the adaptor.
We Recommend A Single Point QD Bungee Sling To Go With The Rear Pistol Grips QD Sling Mount A.5.10.2542 or PVC-GB507B. |
$ 47.99/ Each |
|
|
|
|
|
|
| |
Remington® 870 Pistol Grip Folding Stock & M-LOK Forend
This aftermarket Remington® 870 pistol grip side folding stock kit tactical package includes a pistol grip adjustable buttstock and an M-LOK® forend for mounting accessories to your Remington 870 shotgun, like a laser or flashlight. This Remington 870 folding adjustable stock conversion kit for 12 gauge shotguns features a black ergonomic pistol grip and a tactical folding stock that both have QD sling mounts, and it is a four-position adjustable stock for your comfort. This aftermarket AR-15 M4 style stock for Remington 870 shotguns features a pistol grip and an M-lok forend that gives you better control over your shotgun with a comfortable ergonomic grip in your hands. The stock features QD Sling mounts and slots with a rubber buttpad for recoil reduction, an ergonomic grip with non-slip texturing, and a storage compartment in the grip for small parts. The M-LOK forend for Remington 870 shotguns is perfect for adding M-LOK Picatinny rail accessories to your Remington 870 shotgun. The adjustable folding stock with the pistol grip is made from high quality impact resistant reinforced polymer and steel mounting hardware is included. The color is black. This upgraded pistol grip folding stock and forend kit for the Remington 870 shotguns are ideal for police, law enforcement and tactical home defense shotguns.
Note: Compatible With Most Standard Remington 870 12 Gauge Shotguns Only With a Removable Forend From The 7-3/4" action tube slide assemblies. Note Some Minor Modification may be required to use this kit. Also may not work with heat shields and short barrel shotguns.
We Recommend a Single Point QD Bungee Sling To Go With The Rear Pistol Grips QD Sling Mount A.5.10.2542. and a forend removal tool MT001. |
$ 109.99/ Each |
|
|
|
|
|
|
| |
Remington 870 Pistol Grip Stock and Forend 12 Gauge
This aftermarket Remington® 870™ express pistol grip stock and forend up grade kit is design to give you maximum control over your Remington 870 shotgun models. The synthetic pistol grip stock and forend improves your accuracy while reducing fatigue and recoil when shooting buck shot, slugs and turkey loads. Pistol grip stock is slim ergonomically designed with recoil Reducing Butt-Pad and has sling swivel stud. Forend is non-slip pebble grain grip to provides a stronger bond to your hand. Stock uses your original bolt from factory stock. Stock and forend are made from DuPont® Extreme Temperature Glass Reinforced Polymer. Forend is a No jamming Designed, not to overlap the shotgun's receiver when cycling the pump action, thereby, reducing the chance of a momentary jam by sling or clothing. ATI Limited Lifetime Warranty. Made in the USA.
Stock Kit Fits: Most 12 GA. Mossberg* 500/535/590/835 and Maverick 88, Remington 870 and Winchester 1200/1300 Shotguns.
*Mossberg forends require a 6 3/4" slide action tube. Some Minor Modification may be Required. Note: The forend included in this package is compatible with: (1) Mossberg Shotguns with a removable forend, any Mossberg Shotgun newer than 2006 should be checked before you buy to insure that it has a removable forend. (2) Winchester Magazine Tubes with a Minimum Length of 6 ¼ Inches are Required for use of this Product. |
$ 79.99/ Each |
|
|
|
|
|
|
| |
Remington TAC-14 Side Saddle Shell Holder
The aftermarket Remington 870 Tac-14 side saddle shell holder upgrades your shotgun and provides six round of extra ammunition for quick reloading on the move. The quick detach Velcro side saddle for your Remington 870 Tactical 14 12 gauge shotgun is one of best accessories you can add. The side saddle shell holder will also fit most other shotguns with available mounting space. This side saddle 6 shot shell carrier can be mounted on any Remington 870 12 gauge shotgun receiver or flat stock with available mounting space. Put it in any convenient location for fast reloading. Made from strong durable metal alloy with split body dove tail design for 6 shell 4 shell and 2 shell mounting options. Fast and easy mounting and removal with Velcro style hook and loop tape. Mounting hook and loop tape included. Also Works Great As A Separate Shot shell Storage Caddy For Your Duck Blind, Duck Hunting Boat, Hunting Cabin Or Patrol Car. No Gunsmithing Required.
12 Gauge Shotgun Shell Holder
Designed For 12 Gauge Shotgun Shells
Strong Durable Metal Alloy
Split Body Dove Tail Design
2-4-6 Shell Mounting Option
Easy Mounting And Removal
Approx 6" Long 6 Shell Mounting
Approx 4" Long 4 Shell Mounting
Approx 2" Long 2 Shell Mounting
Holds 6 Rounds Total
No Gunsmithing Required
Fits: Any 12 Gauge Shotguns with available mounting space like Mossberg 500,590A1,835,535 ATS etc, Remington 870, And Winchester 1200/ 1300 & Maverick 88 And More With Flat Available Mounting Space. |
$ 29.99/ Each |
|
|
|
|
|
|
| |
Remington 870 Tactical Stock and Forend Package In FDE
This aftermarket Remington® 870™ tactical shotgun stock conversion upgrade kit comes in FDE flat dark earth. The tactical upgrades in this synthetic stock kit fit Remington 870 12 gauge pump action shotguns. The tactical shotgun upgrade kit comes with one ATI T3 shotgun stock with recoil reducing pistol grip in flat dark earth, tactical shotgun forend with picatinny rail package and a tactLite stock shotgun shell carrier. The stock is 6-Position adjustable Mil-Spec. Stock Provides Smooth Secure Adjustments and Dual-Sided QD Sling Attachment Points. X Series Recoil Reducing Pistol Grip has Built In X Series Recoil Absorbing Back strap with Slim Ergonomic Design and Sure-Grip Texture for Increase Control. The stock comes with a X2 Recoil Reducing Butt-Pad Upgraded to 1 1/4" Thick Pad Recoil Impact is Absorbed Reduces Muzzle Lift Eliminates the Felt Punch of the Recoil Shoot Any Load Size with No Pain Transfer to the Shooter. Stock has Slot for Tactical Sling Attachment Adjustable/Removable Cheekrest Elongated Design to Fit All Users. Cheek rest Provides ½” of Vertical Adjustment. Stock Shell Carrier Holds 5 12 Gauge Shotgun Shells. Mounts to the Cheek rest While Still Allowing the Adjustment of the Cheek rest. Can be Added to Either Side of the Stock Stock grip and forend made from DuPont Extreme Temperature Glass Reinforced Polymer. Limited Lifetime Warranty Made in the USA.
Easy Installation Universal Mount System Securely Fasten your Tactical Stock with no Specialized Tools Mounts Included for All Supported Models in One Package All Mounting Hardware Included.
Note: 12 Gauge Only, Does Not Fit 20 or .410 Gauge Shotguns.
Note: We Suggest Adding Deluxe Heat Shield SBS4600ATI
Mossberg forends require a 6 3/4" slide action tube, Maverick shotguns will also require the addition of a Mossberg 6 3/4" slide action tube.
*The forend included in this package is compatible with: Mossberg Shotguns with a removable forend, any Mossberg Shotgun newer than 2006 should be checked to insure that it has a removable forend. Compatible with removable Remington 870 Forends.
All 3 Items In Package Fit: Most 12-Gauge Mossberg 500/535/590/835 and Remington 870 12-Gauge Pump-Action Shotguns.
We Recommend A Single Point QD Bungee Sling To Go With This Stock A.5.10.2542 or PVC-GB507B. |
$ 159.99/ Each |
|
|
|
|
|
|
| |
Remington 870 Pistol Grip Stock & Side Saddle Shell Holder
This aftermarket tactical conversion kit for your Remington 870 express and 887 nitro mag tactical shotgun is a pistol grip stock with a M4 six position adjustable buttstock and 12 gauge three shot side saddle shell holder designed for police and home defense use. This upgrade for your Remington 870 tactical shotgun features a M4 telescoping stock with two tactical sling attachment points and stock design to fit most users. The stocks collapsed length: 10.75 inches and fully extended length: 13.75". Stock is Mil-Spec diameter and made from super strong glass reinforced polymer for tactical use.
Note: This stock work with most Remington 870,887 12 gauge shotgun models.
Note: similar clones like Norinco Hawk 98, 982 & 981
some modification may be required to fit applications.
We Suggest You Get a Recoil Pad to go with your stock. |
$ 89.99/ Each |
|
|
|
|
|
|
| |
Remington 870 Pistol Grip Stock and M-LOK Forend FDE/Tan
This aftermarket fde desert tan Remington 870 replacement stock and forend tactical upgrade kit includes a pistol grip adjustable buttstock and M-LOK forend package for mounting accessories to your Remington 870 shotgun. The Remington 870 adjustable stock conversion kit features an ergonomic pistol grip and stock both with QD sling mounts and it is four positions adjustable for your comfort. This aftermarket AR-15 M4 stock for your Remington 870 with pistol grip and M-lok forend gives you control over your shotgun with a comfortable ergonomic grip in your hands. The stock features QD Sling mounts and slots with rubber buttpad for recoil reduction and ergonomic grip with non-slip texturing and storage compartment in the grip for small parts. The M-LOK forend is prefect for adding M-LOK Picatinny rail accessories to your Remington 870 shotgun. The adjustable stock with the pistol grip is made from high quality impact resistant reinforced polymer and steel mounting hardware is included. Color is black. This upgrade pistol grip stock and forend kit for the Remington 870 platform ideal for police law enforcement and home defense shotguns.
Note: Compatible With Most Standard Remington 870 12 Gauge Shotguns Only With a Removable Forend From The 7-3/4" action tube slide assemblies. Note Some Minor Modification may be required to use this kit. Also may not work with heat shields and short barrel shotguns.
We Recommend a Single Point QD Bungee Sling To Go With The Rear Pistol Grips QD Sling Mount A.5.10.2542. and a forend removal tool MT001. |
$ 99.95/ Each |
|
|
|
|
|
|
| |
Remington 870 Tactical Red Dot Sight With Picatinny Rail
The green/red dot sight kit for Remington 870 shotguns come with Picatinny base rail mount with a low profile see-thru design for use with your front bead sight. The aftermarket Remington 870 tactical picatinny rail mount is contoured perfectly to fit on all Remington 870/1100 model shotguns with a drilled and tapped receiver from the factory. The 4 MOA Red/Green Dot sight has 5 brightness settings and unlimited eye relief for instant aiming and locking on target with a great field of view perfect for hunting and tactical home defense shotguns. The 38mm tube gives you more light with best in class emerald lens coating for maximum brightness and clarity in the field. The red/green dot sight has consistent and precise coin-adjustable windage and elevation knobs with 1/2 MOA per click. The clear and sharp 4.0 MOA Dots are easy to see with optimal brightness settings for variable shooting and light conditions from dusk to dawn. Sight comes with pop-up lens caps. The Picatinny rail mount is made from high-quality aircraft grade aluminum and includes assembly screws and tool with a Limited lifetime warranty.
Specs:
Red/Green Dot Sight
Material: Aircraft-Grade Aluminum
Integral Windage And Elevation
Heavy Recoil Rated
Magnification: 1X
Tube Diameter: 38 mm
Objective Diameter: 30 mm
Field of View @ 100 yards: 95'
Eye Relief: Infinity
Exit Pupil: 25 mm
Click Value @100 yards: 1/2"
Length: 95 mm
Parallax Setting: Infinity
Batteries: CR2032 3V
Note: Kit Is Compatible with Most Remington® 870™/1100™ shotguns with factory drilled and tapped receivers. Shotguns with out factory drilled and tapped receivers will have to be drilled and tapped by a gunsmith but it is worth it. |
$ 69.95/ Each |
|
|
|
|
|
|
| |
Deluxe Shotgun Heatshield With Ghost Ring Sights
This deluxe ATI steel shotgun heatshield with ghost ring sights lets you install combat sights on your shotgun. Unlike other models the ATI deluxe shotgun heat shield with sights fits all 12, 16, 20, and .410 gauge shotgun barrels. The AR-15 style fixed nylon ghost ring sights further enhance the high quality steel heatshield, which has elongated cooling slots. Simply slide the heatshield with ghost ring sights over the barrel and secure it with the provided hardware. ATI Limited Lifetime Warranty.
ATI Shotforce Deluxe Shotgun Heat Shield With Cooling Slots & Ghost Ring Sight fits most 12, 16, 20, and .410 bore shotguns. Note: Each heatshield should be custom fit. If you do not have the proper tools or do not feel comfortable fitting the heatshield to your firearm, please enlist the services of your local gunsmith. Does Not Fit: Any Vented Rib Barrel Models You would have to change your barrel. |
$ 27.95/ Each |
|
|
|
|
|
|
| |
UTG Instant Target Aiming BullDot Compact Green Laser
The Leapers® SCP-LS289S UTG Instant Target Aiming BULLDOT Compact Green Laser sight is the perfect upgrade for the Mossberg 590 Shockwave, Remington 870 tac-14 shotgun, tactical semi-auto shotguns, rifles, and pistols. The UTG bulldot green laser sight includes a remote pressure switch for quick activation on targets. The Expanded UTG Bull Dot Laser with an 8" Dia. at 50 Yds. is the best for instant target placement. This UTG bull-dot compact green laser has versatile mounting and operation capabilities for a variety of uses. This laser gives you rapid target acquisition in high-stress situations. It has a revolutionary True Strength Platform and Smart Spherical Structure of High Quality, Aircraft Grade Aluminum Construction and Hard Coat Finish. Precise and Wide Range Windage/Elevation Adjustment. This laser sight is fully compliant with all international and US FDA laser safety requirements. Integral Picatinny/Weaver Style Low Profile Mounting Deck. The laser can be used with tactical shotguns, rifles, and most handguns with picatinny or weaver-style rails with mounting space. UTG Lifetime Warranty.
Specs
Material: Aluminum
Switch Operating Type: Push Button Switch
Laser Control & Adjustment: TS & 3Points
Laser Beam Movement: 31.5" @ 11yds
Laser Type:Class 3R
Laser Output Power: 2.0-4.5mW
Laser Wavelength: 630-640nm
Laser Beam Diameter:8"@50yds
Laser Operating Temperature: 59oF - 95oF
Laser Battery Operating Time: 390mins
Laser Battery Type: CR2 Lithium BatteryX1
Laser Range: 300yds
Laser Life Time: 5000hrs
Includes Remote Pressure Switch
Length: 3.4"
Height: 1.2
Color: Black |
$ 88.99/ Each |
|
|
|
|
|
|
| |
UTG 4" Compact ITA Red/Green Circle Dot Scope QD
Leapers SCP-RG40CDQ UTG 4" Compact ITA Red/Green Circle Dot Sight with Integral QD Picatinny Mount lets you zero in on any target with quick precision pinpoint accuracy. Compact dot sight is has crisp and Vivid Red/Green 4MOA Target Dot and 65MOA Circle with 5 Brightness Settings for Diverse Environmental Background. Instant Aiming and Locking on Target with Great Field of View and Unlimited Eye Relief Non-Reflection High Tech Emerald Coatings. Optimal Height Design to Co-witness with Iron Sights on AR Models. Includes Integral Quick Detach Mounting Deck and Flip-open Lens Caps. This Dot sight it is versatile and ideal for most weapon types AR Rifles Pistols and 12/20 Gauge Shotguns. This makes a great addition to any Smith & Wesson M&P15-22 Rifle, AR15, M4, M16, AK47, Hipoint 995, Hipoint 4095TS, Hipoint 4595TS, Beretta Cx4 Storm, Remington 870 Shotgun, Mossberg 500 590 535, Winchester 1200/1300, Mavrick 88 Ect. Limited Lifetime Warranty. UTG 4" Compact ITA Red/Green Circle Dot Sight with Integral QD Picatinny Mount
Specs
Rugged, Durable Construction
Recoil Shockproof
Lightweight
Compact
Magnification: 1X
Tube Diameter: 38mm
Objective Diameter: 30mm
Field of View @ 100 yards: 16.5'
Eye Relief:Flexible
Exit Pupil: 25.0mm
Click Value @100 yards:1/2"
Reticle Illuminated Red Circle Dot & Green Circle Dot
Reticle Size (Diameter, Moa 4) Target Dot
Circle Dot 65MOA
Click Value: 1 Moa
Lenss Optical Emerald Coatings
Includes Filp Up Lens Covers
Includes Integral Quick Detach Mounting Deck
Power Battery Type: CR2032 3V
Battery (Included)
Battery Life (Hours) 50
Switch (# Of Positions) 5 Red 5 Green
Mount Picatinny / Weaver
Housing Construction Aluminum
Finish Matte Black
Length (In) 95mm Approximately
Limited Lifetime Warranty
Can be used with Tactical 3X Magnifier Item # SCP-MF3WEQS
We Have AR-15 Carry Handle Mounts Available If You Need One Item # MAR6M2 & AR15/16
We suggest Extra Batteries Item # CR2032 |
$ 44.95/ Each |
|
|
|
|
|
|
| |
3-9x42 Illuminated Red Green Rifle Scope Rubber Armored
This tactical rubber armored scope is a 3-9x42 illuminated red-green P4 Sniper retical compact rifle scope, fog proof, nitrogen filled heavy recoil rated. This rubber armored scope comes with Picatinny-Weaver style scope ring mounts. The compact scope body is made from a solid aircraft grade aluminum alloy for durability. This scope features fully multicoated lenses for a bright, clear view that are specifically designed for daytime and low-light shooting conditions. The scope has an LED-illuminated P4 Sniper range finder reticle in green or red when illuminated. It has seven brightness settings to choose from, and the illuminated reticle can be seen day or night. When the tactical scope is powered off, the reticle is normal. This scope will fit a flatop riser or a weaver/picatinny rail system found on AR style rifles or shotguns. The scope also comes with integrated tactical pop-up see-through sniper lens caps and batteries are included. This compact scope is great for carbine rifles like H & K, AK-47, AR-15, M-16, M4, SKS, Hi-Point 995 & 40cal, etc. The scope has a ncstar limited lifetime warranty.
Illuminated Rifle Scope Specs
Fog proof: Yes
Nitrogen Filled: Yes
Heavy Duty Recoil Rated: Yes
Magnification: 3-9X
Objective DIA (MM): 42.00
Tube DIA: 30MM
Field of view @ 100 yards (Feet): 37.7-12.5
Eye Relief (inch): 2.00
Exit Pupil (MM): 14-4.7mm
Click Vaiue 1/2 M.O.A.
Comes with scope rings: Yes
Multi Coated lens: Yes
Lens Coating: Ruby
Reticle: P4 Sniper Rangefinder
N.W. (Oz) 16.5
Length (inches): 7.7
Comes With Built In Pop Up Lens Covers.
2 Weaver/PIcatinny Scope Rings
Scope Body Rubber Armored
Color: Black.
Limited Lifetime Warranty
( We suggest Extra Scope Batteries Item # CR2032 ) |
$ 99.99/ Each |
|
|
|
|
|
|
| |
35 Inch Shotgun Case Soft Padded Black
This 12/20 gauge soft 35 inch shotgun case features high density foam inner padding for superior shotgun protection heavy duty carry straps and lockable double zippers. The padded soft shotgun case has two external 8.0”W X 6.0”H storage pockets with Velcro style flap closures and the outside of the gun case it is constructed of tough 1680 denier PVC material. This shotgun case also has metal D-ring for hanging the case onto a hooks. This case can fit most popular shotgun models in this size range. 35"L x 8.5"H. |
$ 36.95/ Each |
|
|
|
|
|
|
| |
48 Inch Shotgun Case Soft Padded Black
This 12/20 gauge soft 48 inch shotgun case features high density foam inner padding for superior shotgun protection heavy duty carry straps and lockable double zippers. The padded soft shotgun case has two external 8.0”W X 6.0”H storage pockets with Velcro style flap closures and the outside of the gun case it is constructed of tough 1680 denier PVC material. This shotgun case also has metal D-ring for hanging the case onto a hooks. This case can fit most popular shotgun models in this size range. 48"L x 8.5"H.
We recommend you purchase a gun case that is 2" longer than your rifle or shotgun overall length. |
$ 39.99/ Each |
|
|
|
|
|
|
| |
Universal Shotgun 12 Gauge Shotshell Holder Ati
Tactical shotgun accessories. ATI shotgun shell holder made from DuPont extreme temperature glass reinforced polymer. Shell holder fits any ATI top folding shotgun stock or full length wood or synthetic stocks with mounting space. Mounts securely with screws on either side of any full length wood or synthetic gun stocks. Quick and easy access to extra 12 GA rounds. Manufactured in the USA. Limited Lifetime Warranty.
Will not fit ATI TactLite Stocks. ( For ATI TactLite Stock Shell Carrier Use Item # SSC0100 ) |
$ 14.99/ Each |
|
|
|
|
|
|
| |
Universal Shotgun Shotgun Heatshield ATI
The (ATI) Universal Shotgun HEATSHIELD is made from formed steel for long life durability and its fits most 12, 20, 16 gauge and .410 pump shotgun barrels. The purpose of the shotgun heat shield tactical elongated cooling slots is to allow maximum heat dissipation from your shotgun barrel for ultimate protection against burns. The universal tactical shotgun heat shield easily adapts to most 12, 16, and 20 gauge and 410 pump shotgun barrels. The black finish matches shotgun components and look great. Easy Installation on most shotguns simply slide over barrel and secure with supplied hardware. This heat shield fits the most popular 12/20 gauge pump shotguns, Remington 870, Mossberg 500,535,590,835, Maverick 88, Winchester 1200/1300, SXP Defender and many more. Does not fit shotgun models with a vent rib barrel. Manufactured in the USA, ATI Limited lifetime warranty.
Steel Formed Shotgun Heatshield
Elongated Cooling Slots for Maximum Dissipation of Heat
Easy Installation - Simply Slide Over Barrel and Secure With Supplied Hardware
13-1/2" Long
Manufactured in the USA
ATI Limited Lifetime Warranty
Note: Each Heatshield should be custom fitted to your shotgun. If you do not have the proper tools or do not feel comfortable fitting the heatshield to your firearm please enlist the services of your local gunsmith. Heatshields should not be used on Mossberg Mariner or Remington Marine Coat shotguns. This will only fit your shotgun if the barrel lug is more than 13.5" from the receiver measure it before you buy and Does not fit shotgun models with a vent rib barrel. Your are responsible for any damage caused by improper installation. |
$ 23.95/ Each |
|
|
|
|
|
|
| |
Remington 870 Saddle Scope Mount 12 Gauge 3.5" Magnum Shotgun
The aftermarket Remington 870 super magnum scope mount, shotgun saddle mount is a perfect fit for 3.5 inch magnum Remington 870 express model shotguns. This Picatinny/Weaver rail shotgun saddle mount is perfectly contoured to 870 shotgun receiver, and it will also fit the Remington Tac 14 so you can mount laser sight on the top picatinny rail or red dot sight. This Remington 870 shotgun saddle scope mount provides a full length scope mount rail for your Remington 870 shotgun. Saddle mount installs using existing parts fast and easy. Made From lightweight strong aircraft grade aluminum.
Fits Most Remington 870/870 Express 12 gauge Shotguns 3.5 Super Magnum and Remington Tac 14. |
$ 39.99/ Each |
|
|
|
|
|
|
| |
Shotgun Universal Cantilever Scope Mount Fits Vent Rib Shotgun Barrels
The Universal Shotgun Vent Rib Barrel Scope Mount fits most shotgun barrels with a vent rib up to 3/8" in diameter. This cantilever shotgun vent rib weaver/picatinny mount works with Remington, Mossberg, Winchester, Benelli, and many more 12/20 gauge shotguns. This vent rib barrel scope mount features a Weaver-Picatinny style rail mount, perfect for adding a scope or red dot sights to your vent rib shotgun barrel. This universal cantilever shotgun vent rib scope mount attaches to the vent rib on your shotgun barrel and provides an extra long weaver/picatinny style scope mount rail over the shotgun receiver, and it is perfectly contoured to the receiver. The length is 11.313" (height 0.2").
This Universal Cantilever Shotgun Scope Mount is perfect for quick barrel changes. The scope is attached to the barrel, not the shotgun's receiver. This rugged mount bolts onto rib shotgun barrels in minutes with no modifications to the shotgun gun. It allows you to change barrels on your shotgun without losing the zero on your sighting system. It's good for left-handed and right-handed shooters. It works with Weaver/Picatinny style rings. There is mounting hardware included. No gunsmith is required. made from aircraft-grade aluminum. Color: Black. |
$ 49.99/ Each |
|
|
|
|
|
|
| |
Remington 870 Pistol Grip Stock With Recoil Pad
This aftermarket Remington's 870 pistol grip stock with recoil reducing pad is designed to fit most Remington shotguns 870, 887, and 12/20 Gauge shotguns. This shotforce ati universal shotgun pistol grip stock for your Remington 870 and 887 shotguns features a slim, ergonomically designed pistol grip for maximum control and a scorpion recoil reducing butt pad so impact is absorbed shooting any load size, it can now be done with no pain being transferred to the shooter. The shotgun stock has a sling swivel stud for sling attacment and uses factory stock bolts. The stock features a pebble-grain grip area for better control, and it is weatherproof and scratchproof. This universal shotgun pistol grip stock comes with a complete set of adapters and spacers, making installation on most 12 and 20 gauge shotguns simple. Most Maverick 88, Mossberg 500/535/590/835, Remington 870, and Winchester 1200/1300 Norinco 98 Series Pump Shotguns, H & R Pardner Pump, NEF Pardners Pump-Shotgun, and IAC Hawk 981 and 982 Remington 870 clones are compatible. This ati shotgun stock is made in the USA of dupont reinforced polymer and comes with a lifetime warranty.
Specs:
Length of pull 13.5"
Improves Shooting Accuracy
Reduces Fatigue Shooting Slugs And Turkey Loads
Provides A Stronger Grip
Slim Ergonomically Designed
Non-Slip Pebble Grain Grip
Uses Factory Stock Bolt
Sling Swivel Stud
Easy Installation
Dupont Reinforced Polymer
Manufactured In The USA
Limited Lifetime Warranty
Note: The stock will fit most of the 20 gauge shotgun models listed, but it will protrude slightly at the rear due to the smaller 20 gauge receiver dimensions. Some modification may be required on these (included adapters) to fit some 20 gauge shotgun models.
We recommend a tactical shot shell holder for this stock SHO0500. |
$ 59.99/ Each |
|
|
|
|
|
|
| |
TactLite Stock Shell Carrier
ATI SSC0100 TactLite Shotgun Stock Side Saddle Shell Carrier, Holds five 12 Gauge Shotgun Shells. Fits ATI TactLite shotgun Stocks with Cheekrest Attached. Mounts to the Cheekrest While Still Allowing the Adjustment of the Cheekrest. Military Type III Anodized, 6061 T6 Aluminum Mounting Bar. Can be Added to Either Side of the Stock. Limited Lifetime Warranty. Manufactured in the USA. |
$ 23.95/ Each |
|
|
|
|
|
|
| |
Weapon Light For Remington 870
This weapon light for the Remington 870 Tactical Shotgun features a Tri Rail shotgun barrel mount kit. The mount is a solid aluminum construction with a matte black finish. The barrel mount has a clever three-piece design for clamping on the shotgun barrel and mag tube. The Picatinny/Weaver Style Rails on the sides and bottom allow for mounting laser sights, QD sling swivels and other accessories. Compatible Firearm Barrel & Mag Tubes (Range Diameter.75"-1.1").
Flashlight is a super Bright 800+ Lumens LED Weapon Light. Flashlight Comes With Weaver/Picatinny Mounting Ring, Push-Button and Remote Pressure Switch System. Fits SAIGA 12, Winchester 1200/1300, Mavrick 88 Shotguns, Escort Shotguns MP-A, MPS WS Guard, Mossberg 500 Shotgun, Mossberg 590A1 Shotgun, Mossberg 930 SPX . Remington Model 870 TAC Desert Recon, Remington Model 1100 TAC 4, Remington Model 887 Nitro Mag Tactical, Remington Model 870 Express Tactical, Remington 870 Magnum Shotgun, Winchester 1200 Defender, Winchester 1300 Defender, Ithaca Shotgun Model 37 Defense And more.
Features
Weapons Mountable (Will Mount To Any 1" Tube Or Barrel )
Also Mounts to Weaver and Picatinny Type Rails
Tactical Momentary “On" Remote Pressure Pad
Push Button On/Off Battery Cap
New Integrated Weaver Mount On Weapons Mount
Can Handle Recoil Of 12 Gauge Shotgun
IP65 Rating Water-Resistant
Ultra-Bright LED
800+ Lumens
Working Time Hours Up To 4
Included Accessories
On/Off Push Button Tail Cap
Tactical Pressure Pad Tail Cap
Shotgun Tri-rail Mount Mag Tube/ Barrel Mount 1"
(1) 18650 Battery Rechargeable
(1)(Battery Charger
We Suggest You Purchase 1 Extra 18650 Rechargeable Battery For This Item # 18650B |
$ 79.99/ Each |
|
|
|
|
|
|
| |
Remington 887 Nitro Mag Tactical Stock 6-Position Adjustable
This aftermarket Remington 887 Nitro Mag Tactical Stock also fits Remington 870 express and the recoil reducing pistol grip system and stock buttpad provided maximum comfort. The tactical pistol grip shotgun stock for your Remington 870 express and 887 Nitro Mag is six position adjustable with dual-sided QD sling attachment point. The shotgun stock features a X2 recoil reducing butt-pad 1 1/4″ thick to eliminates the felt punch of the recoil and recoil reducing pistol grip, adjustable removable cheekrest. Stock is scratchproof and weatherproof made from DuPont® Extreme Reinforced Polymer. Stock is easy installation with universal mount adaptor system to fit suported models. Length of Pull: 13 1/8″ to 16 5/8″. Made in the USA. Limited Lifetime Warranty.
Fits: Most 12/20-Guage Remington 870/887/7400, Mossberg 500/535/590/835 Maverick 88, Winchester SXP, FNH USA P-12, Most Savage Stevens 320 prior to 2016, TriStar Raptor, Charles Daly 301 Pump-Action Field Shotgun 12 ga Pump-Action Shotguns.
Note: Stock Will Fit Most 20 Gauge Shotgun Models Listed But It Will Be (Protruding Slightly at The Rear Due to 20 gauge Receiver Dimensions Are Smaller).
We Recommend a QD Single Point Bungee Sling To Go With This Stock A.5.10.2542
We Recommend for The Remington 870 a Tactical Forend TSG0300.c-REM |
$ 109.99/ Each |
|
|
|
|
|
|
| |
ATI Universal Shotgun Tactical Top Folding Stock
ATI TFS0600.c Universal Shotgun Tactical Top Folding Stock color is Black. This Tactical ATI Top Folding Stock Locks Open and Closed. This Universal Shotgun Top Folding Stock is a Replacement stock for 12/20ga shotguns. Folds down for easy compact bstorage. Constructed of black tough fiberglass resin so sturdy it comes with a (ATI) lifetime warranty. It has a Sling swivel stud included. Fits most standard shotguns including
The slim, ergonomic pistol grip helps control kick back when unfolded. The butt plate offers a steady rest for the shoulder for more accurate shooting. It has a Quick release button that locks in the the open and closed in its positions in seconds. Functions in open or closed position. Ambidexterous. Mounting Hardware and Adapters Included Lifetime warranty.
Fits Most 12 & 20 Gauge Mossberg 535/500/500A/590/835, Maverick 88, Remington 870, Winchester 1200/1300 and Defender, Maverick 88 and Norinco 98 Series*. Simple installation - no gunsmithing required. Note Stock Will Fit Most 20 Gauge Shotgun Models Listed But It Will Be (Protruding Slightly At The Rear Due to 20 gauge Receiver Dimensions Are Smaller).
Can be Fired in Opened or Folded Position
Pre-Drilled to Accept Shotgun Shell Holder
Pistol Grip
Easy Installation
Ambidextrous
Steel Hardware
Sling Swivel Stud Included
DuPont® Extreme Temperature Glass Reinforced Polymer
Quick Release Button Allows Stock to Lock in Folded/Unfolded Position
Limited Lifetime Warranty
Shotshell Holder Not Included But Available Item # SHO0500
We Also Recommend A Shotgun Heatshield Item Number SBS4600ATI |
$ 74.95/ Each |
|
|
|
|
|
|
| |
UTG Ultra Strong Firearm Cable Lock
Shotgun UTG Ultra Strong Firearm Cable Gun Lock 5.3mm(0.21")X15", California DOJ Approved. Compatible with most revolvers, pistols, rifles and shotguns. One year limited warranty.
Certified by California Department of Justice
Universal Design Compatible with most revolvers, pistols, rifles and shotguns.
Heavy Duty Hardened Steel Alloy Construction for Maximum Strength and Security
Easy Installation
One year limited warranty |
$ 6.99/ Each |
|
|
|
|
|
|
| |
UTG QD Sling Swivel Adaptor Mount Picatinny 45 Angled offset
The Leapers TL-SWPM01 UTG QD sling swivel adaptor mount picatinny 45-angled offset sling swivel mount is precision machined from aircraft grade aluminum with a hard anodized matte black finish. This rugged sling swivel mounting base with max strength torx drive locking screw for picatinny rail is extremely compact, lightweight, and low profile. The utg qd sling swivel adaptor mount accepts any quick detach sling swivel with a 0.37-inch diameter swivel stud. This mount is reversible for right-or left-handed sling use. The qd swivel housing is designed with quarter-turn rotational overtravel stops to better control sling position and movement. It includes a t-20 torx allen wrench for simple and friendly installation, no gunsmith required. Material: aluminum height: 0.38 "Length : 1" color: black. Utg one year limited warranty.
Compatible With UTG Sling Swivels Below.
TL-QDSW08A UTG Standard Push Button QD Sling Swivel, 1" Loop
TL-QDSW08B UTG Standard Duty Push Button QD Sling Swivel, 1.25" Loop
TL-QDSW08C UTG Push Button QD Sling Swivel, 1.25" C-Shape Loop
TL-QDSW18 UTG Heavy Duty Push Button QD Sling Swivel, 1.25" Loop |
$ 12.49/ Each |
|
|
|
|
|
|
| |
Remington 870 Tactical Shotgun Tactical Forend
Remington 870 Shotgun Tactical Shotgun Forend TSG0300 With 2 Picatinny Rail Locations at 90° Increments Around Forend. Tactical Shotgun Picatinny Rail Package. One Left 2" Picatinny Rail, One Right 2" Picatinny Rail. Rails Allow for Easy Installation of all Your Favorite Accessories. 2 Blank Inserts for When Rails are Not in Use. Textured Forend Very Tough, yet Extremely Lightweight. Made From DuPont Extreme Temperature Glass Reinforced Polymer. Manufactured in the USA ATI Limited Lifetime Warranty.
Fits: Most 12 GA Mossberg 500/535/590/835, Maverick 88, Remington 870, and Winchester 1200/1300/SXP Shotguns.
Note Mossberg / Maverick 88 forends require a 6 3/4" slide action tube in order to Fit check your shotgun before you order.
Does Not Fit: Remington 870DM & Mossberg 590M
Note *The forend included in this package is compatible with most Mossberg Shotguns with a removable forend, any Mossberg Shotgun newer than 2006 should be checked to insure that it has a removable forend. Winchester Forend Tubes with a Minimum Length of 6 ¼ Inches are Required for use of this Product.
Warning!!! - Do Not Over Tighten Screws Stripped Holes and Broken Screw Heads are NOT Covered Under the Warranty. |
$ 29.99/ Each |
|
|
|
|
|
|
| |
12 Ga Shotgun Side Saddle Shotshell Holder 6 Shot
Quick Detach Side Saddle Universal 12 Gauge Tactical Shotgun Shell Holder / Carrier Holds 6 Rounds. This Side Saddle 6 Shot Shotshell Holder Can Be Mounted On Any 12 Ga. Shotgun Receiver Or Flat Stock With Available Mounting Space. Put It In Any Convenient Location For Fast Reloading. Made From Strong Durable Metal Alloy With Split Body Dove Tail Design For 6 Shell 4 Shell And 2 Shell Mounting Options. Fast And Easy Mounting And Removal With Hook And Loop Tape. Mounting Hook And Loop Tape Included. Also Works Great As A Separate Shotshell Storage Caddy For Your Duck Blind, Duck Hunting Boat, Hunting Cabin Or Patrol Car. No Gunsmithing Required.
12 Gauge Shotgun Shell Holder
Designed For 12 Gauge Shotgun Shells
Strong Durable Metal Alloy
Split Body Dove Tail Design
2-4-6 Shell Mounting Option
Easy Mounting And Removal
Approx 6" Long 6 Shell Mounting
Approx 4" Long 4 Shell Mounting
Approx 2" Long 2 Shell Mounting
Holds 6 Rounds Total
No Gunsmithing Required
Fits: Any 12 Gauge Shotguns, Mossberg 500, Remington 870, And Winchester 1200/ 1300 & Maverick 88 And More With Flat Available Mounting Space.
|
$ 29.99/ Each |
|
|
|
|
|
|
| |
Classic Safari Shotgun Shell Stainless Steel Vacuum Beverage Bottle
The 33.8oz Classic Safari Shotgun Shell Stainless Steel Vacuum Insulated Beverage Bottle, Keeps Hot Beverages Hot and Cold Beverages Cold size is one liter. Shotgun your coffee with this fun and functional Shotgun Shell vacuumed sealed insulated beverage bottle it looks just like a shotgun shell perfect for hunters. Take it with you on your next hunting trip, outing or to work. Enjoy your beverage or soup in this fun vacuum insulated stainless steel beverage bottl. Keep it hot or cold: the stainless steel liner and double wall construction with one-touch stopper will maintain the temperature of your drink or soup. Whether hot or cold, you'll be sure to have a beverage ready to go, the way you like it. Shotgun shell design: this vacuum sealed bottle is designed to look like a shotgun cartridge. The red bottle is topped with a brushed finish screw down cap resembling a brass head and rim of the cartridge, completing the look. Makes a great gift: give one to yourself and one to a friend. Perfect for hunters, marksmen and gun enthusiasts of all types. Your favorite duck hunter will thank you.
Some facts about the vacuum insulated stainless steel beverage bottles. It is a container made of stainless steel and a vacuum structure. The vacuum insulation structure delays the heat dissipation or cold dissipation of the liquid such as water, coffee, tea, inside vacuum insulated stainless steel bottle to achieve the purpose of heat or cold preservation. Also, the shiny wall of a vacuum insulated stainless steel bottle can reflect the heat radiation of hot beverages aswell. The vacuum bottle structure can block the heat and cold transfer, thus preventing heat convection and achieve the effect of cold or hot insulation. This is why vacuum insulated water bottles can keep the beverage hot or cold for a long time. |
$ 22.95/ Each |
|
|
|
| |
|
